The Iloca II was was introduced in the early 1950's, and was one of the first production cameras made by the company. It is a fairly simple and straightforward camera to use, except perhaps for the rather awkward film loading and film transport mechanism. The overall quality of components, such as the lens and shutter assemblies, is quite reasonable for this class of camera. The Iloca II is virtually identical to the Iloca I, except that the Iloca II has a built-in rangefinder, and the rewind lock has been relocated to the back of the camera.
This model's specification is fairly orthodox with a choice of either Prontor–S or Vario shutters, and a Jlitar 45mm lens. The film transport and rewind knobs are located on the top plate along with the film frame counter. The rewind lock is on the back of the camera. All other controls, including the shutter release, are located on the shutter housing itself.
The film loading procedure is a bit tricky with this camera and it is critical that the film is correctly located on the 'out-of-sight' sprockets. If loaded incorrectly, then the film may jam or tear, or may cause problematic film advance at the very least - not good news for any photographer, and probably a factor for the relatively short production period for these early models.
However, with some care, you should be able to load and shoot a full roll without problems. In other respects, the camera's compact, slender one-piece body housing is quite comfortable to hold and use. And the built-in rangefinder on this model is a useful aid to help with accurate focussing.
The early series cameras had a relatively short production lifespan before the introduction of new models with removable camera backs and completely redesigned film loading and film transport mechanisms.
Some tips for loading film into this model camera: Slide the catch to the 'o' position, then remove the base plate. Using a pair of scissors, extend the cutout area on the leading part of the film to about 10 cm. Remove the film take-up spool and feed the end of the film into the slot in the spool. Next, insert the film canister and take-up spool, together with the film, into their respective housings in the camera, ensuring that all components are correctly positioned in order to avoid problems when advancing the film. The film, film canister and take-up spool should be inserted completely into the camera leaving no portion protruding, and there should not be any excess pressure on the base plate. Replace the base plate and close the catch.
Iloca's entry model into the camera market, this camera offers a relatively simple and compact design. The film loading and film transport mechanism can be a bit awkward, but provided the film is loaded correctly, the camera is capable of producing quite acceptable results under favourable conditions. The Iloca II model provides the added benefit of a built-in rangefinder to assist with accurate focussing.
Specifications: Iloca II
Camera Type: 35 mm Compact Camera
Format: 35mm film format producing image sizes 24mm x 36mm
Shutter: Prontor–S with speeds 'B', 1, 1/2, 1/5, 1/10, 1/25, 1/50, 1/100, 1/300 sec with delayed action lever and flash socket; or
Vario with speeds 'B', 1/25, 1/75, 1/200
Lenses: Jlitar 1:3.5 / 45 mm, focus range 3' 9'' (1.2 metre) to ∞